T-REX 470LP Super Combo

SKU
12110
Num. Manufacturier:
RH47E02XW
566,79 CAD $

Date de sortie : Allow 2 weeks for shipping Requiert un délais de 2 semaines
Quantité en inventaire : 0

Extended 380mm main blades effectively improve the flying stability and power performance. The new engineered airfoil design effectively reduces turbulence at the end of the main blades,this saves power consumption during extreme 3D flight. New 69 size tail blades are longer in length and offer superior tail holding performance, even during demanding 3D flight.

Brand New 470EFL Main Rotor Head provides superior flight stability and offers a lower CG design to reduce flying resistance while providing a more rigid and fast rotor head response. Brand New 470 Main Shaft and Feathering Shaft: Main Shaft outer dimension increased from Ø5mm to Ø6mm, while the Feathering Shaft outer dimension increased from Ø4mm to Ø5mm,effectively strengthening the Main and Feathering Shaft while improving durability.

New 470MX motor features; high efficiency, superior power, excellent torque, low current draw, and a low operating temperature. The 470MX is capable of maintaining consistent torque and head speed through continuous 3D maneuvers. 470MX motor is designed for 3D flight.

New Swashplate design with zero slop delivering a precise and accurate controlled flight.

Manufactured using the latest composite technology to embed brass inserts into main shaft bearing block, which enhance the structure integrety and strength. You can feel the solid structure even in extreme 3D flight.

Carbon fiber side frame plates are manufactured using a proprietary composite material integration technology which integrates the battery mounting rails into the frame. This unique use of open spaces within the frame creates a rigid frame and is aesthetically pleasing.

An additional 3rd main shaft bearing block increases the strength of the main frame while improving 3D flight.

Brand new latching battery tray which utilizes integrated mounting rails inside the frames to simplify insertion / removal of battery while providing protection for the battery.

Specially designed for T-REX 470 providing higher currency output and support for high voltage servos with an internal BEC output from 5V to 8.4V which can be set up based on servo specification.

DS350M HV Cyclic and DS455 HV Rudder servos support up to 8.4V for superior responsiveness, extreme torque, and improved performance.

Innovative adjustable belt guide pulley, allows a convenient way to adjust the belt tension by releasing or tightening the screw. The screw is used to maintain optimal belt tension over time.

Brand New Belt Drive Assembly design allow for quiet operation and low cost on serviceability.

Landing skid is tilted 5 degrees forward to improve crashworthiness.

Newly designed vertical tail servo mount to improve CG while increasing the responsiveness of 3D flight.

A wider Tail Boom to improves the torsional strength.

Designed using a proprietary material integration technology which creates a unique look and improves the Vertical Stabilizer's stiffness.

The newly designed dual point supported tail control assembly delivers slop free performance while improving rudder resolution and precision.

The new tail rotor holder design includes thrust bearings which increases durability, as well as significantly improving the accuracy and efficiency of the tail performance when using 69 size Tail Blades.

Standard equipment

●Microbeast PLUS Flybarless System X 1
●RCE-BL50X 50A Brushless ESC X 1
●470MX Brushless Motor(1800KV) X 1
●DS450 Digital Servo X 3
●DS455 Digital Servo X 1

Specification

●Length: 755mm
●Height: 210mm
●Width: 108mm
●Main Blade Length: 380mm
●Main Rotor Diameter: 850mm
●Tail Rotor Diameter: 181mm
●Motor Pinion Gear: 11T
●Main Drive Gear: 121T
●Main Drive Pulley: 56T
●Tail Drive Gear: 15T
●Drive Gear Ratio: 11:1:3.73
●Weight(w/o battery): 840g

Accessories

●T-REX 470L DOMINATOR Set x 1
●380 Carbon Fiber Blades x 1set
●69 Tail Blade x 1set
●470MX Brushless Motor(1800KV) x 1
●DS450 Digital Servo x 3
●DS455 Digital Servo x 1
●RCE-BL50X 50A Brushless ESC x 1

Radio transmitter and electronic equipment required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge or Digital Pitch Gauge
4.6S Li-Po 1400~1800mAh battery x 1

Plus d’information
Numéro distributeur RH47E02XW
Numéro Manufacturier RH47E02XW
Pays Taiwan
Marque Align
ARF N/A
Giftcards Type N/A